It has similar application areas with PVC. It has chemical resistance to acids and bases. It features weldability. Weldability is more difficult than PVC but more resistant weld seams are obtained. It has higher temperature resistance than polyethylene and PVC. Cost is low and economical since its density is very low. It has a high impact resistance. It can be used on section plates. Mechanical strength values are better compared to Polyethylene.

Geschlossenzellige Polyäthylenschäume in vernetzter und unvernetzter Ausführung erhältlich. Raumgewichte: von 20 kg/m³- 110 kg/m³

Im Bereich Kunststoff-Halbfabrikate bieten wir eine grosse Auswahl an verschiedenen Kunststoffplatten an, welche nach Wunsch in unserer Fertigungsabteilung zugeschnitten, gebohrt, gefräst werden Unser Sortiment im Bereich Kunststoffplatten umfasst alle gängigen Kunststoffe sowie Sondermaterialien und spezielle Ausführungen.

TECASINT 6012 is an unfilled grade for direct forming parts with max. strength and elongation. Lowest modulus and thermal conductivity and optimum electrical properties.

BIEGLO offers high temperature resistant and flame retardant fibers. The application is similiar to meta-aramid, but PI fibers have its own advantages. The long-term service temperature is 260℃. The decomposition temperature is 560℃. The LOI is 38%, it means it is non-flameble fiber. The Dexnyl Polyimide fibers are applicable in many products, but they are used best in niche-applications with extreme standards for the material: 1- FR Protective clothing: e.g. military fligth clothing, flame resistand underwear, firefighter uniform etc. 2- High temperature filtration and industrial insulation: e.g. dedusting filtration for cement factories, steel or powder plants, air filtration for painting area operated at more than 300°C . 3- Composite material: taking advantage of insulation, flame retardance and high emperature resistance, chopped fiber can be used as reinforced material.

Technical plastic : Polyethylene (Short : PE) Product name Polyethylene (PE or sub groups like PE-HD, PE-LD, PE-HMW, PE-UHMW, PE 300, PE 500, PE 1000 or RCH 1000 and many more) Delivery form Sheets, cuts, milled products, base profiles Specification Polyethylene - technical plastic Polyethylene ( Short: PE ) is a technical plastic that can be processed easil. It has a density of about 0,95g/cm³ and with that it's the second least weighing plastic of all technical plastics and just because of that it offers a very interesting price. The moisture absorbtion of PE is about 0,0 %. The material is really good against lyes and acids , has a self-lubricating effect and is easy to mill ( cut, milling, lathe, water jet cutting and welding ). Furthermore it is a great material for abrasive fraught parts in e.g. machine engineering ( PE UHMW ), as inlay for bulk containers or as a cutting boards in the food industry or households. We would like to advise you which kind of PE RG ist the... Product name:Polyethylene (PE or sub groups like PE-HD, PE-LD, PE-HMW, PE-UHMW, PE 300, PE 500, PE 1000 or RCH 10 Delivery form:Sheets, cuts, milled products, base profiles Colors:Standard nature , black, green , other colors possible Regenerate : Standard black and green Thickness:8 - 280 mm (Thickness > 280 mm possible with welding ) Dimensions:3.000 x 2.500 x 8 - 120 mm* 2.000 x 1.000 x 10 - 280 mm or cuts from these standards Surface:smooth or planed, * checker pate surface possible Minimum order quantity:1 Standard sheet Material:New material or Regenerat in PE HD an PE HMW Colors:Standard nature & black , other colors possible Regenerate : Standard black Thickness:1-30 mm Dimension:2.000 x 1.000 mm 3.000 x 1.500 mm Or cuts out of these standards Surface:smooth, structured, with a foil or Regenerate which could have some flaws Minimum order quantity:20 sheets

Exotherme Treibmittel mit unterschiedlichen Wirkstoffen/-gehalten, Gasausbeute und Verarbeitungstemperaturen als Pulver, zur Verschäumung von Thermoplasten im Streich-, Spritzguss- und Extrusionsverfahren. Chemische Treibmittel Treibmittel für die chemische Verschäumung von Kunststoffen und Gummi. WTH-Treibmittel werden allgemein zur Verschäumung von Kunststoffen wie PVC, Polyolefinen wie z.B. PE, PP und Styrolderivaten wie z.B. ABS, PS sowie Elastomeren eingesetzt.

PE-Schaum ist ein geschlossenzelliger Werkstoff mit einer feinen Oberfläche. Wir bieten Rohware und konfektionierte Ware für diverse PE-Schaum-Typen und Qualitäten an.

Wir bieten Ihnen eine große Auswahl an Technischen Kunststoffen und ermitteln für Sie den technisch und wirtschaftlich optimalen Kunststoff für Ihre Anforderungen.

PDM granül kauçuktan üretildiği için oldukça esnek bir maddedir. Bu nedenler her türlü şarta kolaylıkla ayak uydurabilir. Yazın güneşi ya da kışın soğuğu bu malzemeye hiçbir şekilde zarar veremez. Elastik olmasından dolayı darbelere karşı oldukça fazla dayanıklıdır. Elastik olması malzemenin her şekle girmesine de yardımcı olur. Yapısı gereği çok dayanıklı bir ürün olan EPDM granül, öyle hava şartlarına göre değişiklik göstermez. Her duruma dayanıklı olan bu malzemede esneme, genleşme, büzülme gibi olaylar asla yaşanmaz. Bu sayede yaz sıcağında ve kış soğuğunda kolaylıkla kullanılır. EPDM sonradan renklendirilen bir madde değildir. Boyama yöntemi kullanılmayan bu malzemede renk solması gibi bir durum asla yaşanmaz. Yıllarca renkleri bozulmadan kalabilir. Bu malzemede aklınıza gelebilecek her rengi kullanabilirsiniz. Geniş bir renk seçeneğine sahip olan EPDM granül size istediğiniz rengi seçme şansını verecektir.

Erwerben Sie PTFE Platten im Format 2.000 x 1.000 mm in vielen verschiedenen Stärken bis 100 mm. ✓ Exzellente Chemikalienbeständigkeit ✓ Dauergebrauchstemperatur bis zu 260 °C ✓ Hervorragende Gleit-/ Reibungseigenschaften

Poliester Polyester

Kunststoff-Pulver für das Lasersintern basierend auf PA1212 mit Mineralfaser gefüllt Wir sind Hersteller von Polyamiden aus Sebazinsäure, wir nennen das Produkt PA1212-basiertes Pulver. Bauteile aus diesem Pulver weisen sehr ähnliche Eigenschaften, wie das häufig benutzte PA12-Pulver. Unsere Pulver sind auch durch Fällung hergestellt, wodurch sich sehr gute Fließfähigkeiten der Pulver ergeben. Bauteile aus FS3250MF weisen folgende Eigenschaften auf: Modulus: 6100 MPa Tensile Strenght: 51 MPa Elongation at break: 5%

1)Polyimide Film Based FCCL--3 Layer FCCL 2)Adhesiveless Single-Sided Copper Clad Laminate-- 2 Layer FCCL , 2-layer flexible circuit boards 3)Adhesiveless Double-Sided Copper Clad Laminate-- 2 Layer FCCL 4)Conductive Adhesive Film 5)EMI Shielding Film(Electromagnetic Interference Shielding Film) 6)Ultrathin FCCL 7)Ultra-Thin Peelable Copper Foil 8)Composite Lithium-ion Battery Copper Foil 9)TRF Embedded Resistor Film 10)Very Low Profile Copper Film(HVLP) 11)LCP FCCL(Single Side/Double Side)--2L FCCL Yancheng Tiandi Insulation Co.,Ltd. https://www.polyimide-pi.com/polyimide-fccl.htm hsinsulation@aliyun.com , hsinsulation@hotmail.com Tel :+86-139-61986280 Fax : +86-515-69011600

Unser Unternehmen bietet Ihnen ein breitgefächertes Repertoire an flexiblen Elektro-Isolierstoffen für den Elektromaschinen-, Transformatoren- und Generatorenbau an. Diese Produkte kommen außerdem in der Leuchten- und Lampenindustrie sowie in der Medizintechnik zum Einsatz.

Auf unserem modern ausgestatteten Maschinenpark mit 12 Spitzgießmaschinen produzieren wir Kunststoffformteile mit einem Schussgewicht von 1g bis 660g.

Ein Vliesstoff (englisch nonwoven) ist ein Gebilde aus Fasern begrenzter Länge, Endlosfasern oder geschnittenen Garnen jeglicher Art und jeglichen Ursprungs, die auf irgendeine Weise zu einem Vlies zusammengefügt und auf irgendeine Weise miteinander verbunden worden sind. Davon ausgeschlossen ist das Verkreuzen bzw. Verschlingen von Garnen, wie es beim Weben, Wirken, Stricken, der Spitzenherstellung, dem Flechten und Herstellung von getufteten Erzeugnissen geschieht. Vliesstoffe stellen eine Materialgruppe mit einer großen Eigenschaftsvielfalt dar, die durch die Vielzahl von nutzbaren Rohstoffen und Herstellungsvarianten einem breiten Spektrum von Anwendungsanforderungen gezielt angepasst werden kann. Vliesstoffe sind vielseitig einsetzbar, wie z.B. im Bauwesen (Tiefbau & Hochbau), in der Filtration, Automotiv-Bereich, Kunststoffindustrie, Elektrotechnik, Landwirtschaft und Gartenbau, Verpackung und in der Kabelindustrie. Aufmachung:Scheiben & Rollen Farbe:Natur, Weiß Foliendicke:Auf Anfrage Folientyp:Vlies Herkunftsland:China

Diversidade de Plásticos Técnicos de alta qualidade.

Das Gummi NP- Granulat ist frei von kanzerogenen N- Nitrosaminen und Weichmachern.

High-density polyethylene HDPE Low-density polyethylene LDPE Polypropylene PP Polypropylenewith loads ABS Polystyrene PS Polycarbonate PC Metraquilate Polyamides PET PolyoxymethylenePOM

It is a material with a high resistance to chemicals. Its specific weight is low. It is a slippery material with a low coefficient of friction. The water and moisture absorption property is close to zero. It can be used as cutting plate especially in industrial kitchens and butcher cutting log. It has the ability to be welded. The element that characterizes polyethylene is the molecular weight. Low molecular weight can be grouped into three groups: low molecular weight (PE 300), high molecular weight (PE 500) and ultra high molecular weight (PE 1000).

The unfilled grade TECASINT 5111 natural is based on the high-performance plastic polyimide, which is characterised by its very good thermal stability with low thermal expansion. Polyimides are non-melting polymers with a service temperature of 300 °C, which is considerably higher than that of PEEK or PPS. In addition, TECASINT 5111 natural has a high creep resistance. These properties makes PI plastic ideal for applications where high temperature resistance is required, such as in the aerospace industry. TECASINT 5111 natural has good chemical resistance, especially to light acids and many organic solvents. In combination with the very good electrical insulating properties of the PI material, TECASINT 5111 natural is also perfectly suited for applications in the semiconductor industry, electrical engineering or mechanical engineering. Moreover, the polyimide material has good mechanical properties, good wear resistance and is also resistant to high-energy radiation.

TECASINT 2011 is one of the unfilled natural grades. It has a very high modulus of elasticity, high rigidity and hardness. Compared with TECASINT 1011 it has significantly reduced moisture absorption, higher toughness and better machining properties. Within the TECASINT 2000 series the material has the maximum strength and elongation, together with a high modulus of elasticity and minimal thermal and electrical conductivity. TECASINT 2011 is highly pure with low outgassing in accordance with ESA regulation ECSS Q 70 20.

Compared with the other TECASINT materials the TECASINT 4100 series exhibits extremely high thermal stability, extremely low moisture absorption and high mechanical rigidity. This is accompanied by a very high oxidative stability and increased resistance to chemicals. TECASINT 4111 has a very high thermal stability (HDT/A=470°C). Rigidity and modulus are significantly increased vis a vis conventional polyimides in a temperature range up to 400 °C. The material has minimal thermal and electrical conductivity. The plastic is highly pure with low outgassing in accordance with ESA regulation ECSS Q 70 20.

TECASINT 1011 is an unfilled polyimide natural grade. This material particularly stands out in the TECASINT 1000 product family for very high strength and elongation. It is characterised by properties such as a very high modulus of elasticity, high rigidity, high degree of hardness and low thermal and electrical conductivity. These are accompanied by high purity and low outgassing in accordance with ESA regulation ECSS Q 70 20. Its previous name was SINTIMID Pur HT.

Compared with the other TECASINT materials the TECASINT 4000 series exhibits very low moisture absorption and high oxidative stability along with improved chemical resistance. Despite its high strength, TECASINT 4011 has high elongation at break and toughness. Rigidity and modulus are significantly increased vis a vis conventional polyimides in a temperature range up to 260°C. It also has minimal thermal and electrical conductivity. The plastic is highly pure and displays low outgassing in accordance with ESA regulation ECSS Q 70 20.

TECASINT 6062 is a highly filled grade for direct forming parts with low static friction. For lubricated and unlubricated tribological applications

Starting with the base polymer TECASINT 1011, TECASINT 1061 with 15% graphite and 10% PTFE has been developed. Its properties include very low static friction and a low coefficient of friction. The material is self lubricating, which means it also has good properties in dry running conditions. TECASINT 1061 is suitable for low friction and low wear applications at medium temperatures (<200°C) and loads.

TECASINT 2391 has been developed with 15 % MoS2 from the base polymer TECASINT 2011. It has optimum friction and wear properties in a vacuum, which means it can be used in space travel applications, in a vacuum or in inert gases (techn. dry). The plastic displays low outgassing in accordance with ESA regulation ECSS Q 70 20.

Starting with the base polymer TECASINT 5011, TECASINT 5051 with 30 % glass fibre has been developed. This material is characterised by reduced thermal elongation, reduced moisture absorption and high wear strength during chip test applications in the semiconductor industry. It has good electrical insulation properties and surface hardness, and also high rigidity. The glass transition temperature is 340°C, while the maximum service temperature may be – for a short time – up to 300 °C.